Latest News

More horsepower and torque for second generation Dodge Charger, Challenger, and Chrysler 300 with a Hemi V8 engine

The Chrysler LX platform based 300, Dodge Charger, Challenger and Magnum could be considered a U-turn in new car engineering when it was released in 2005. Auto manufacturers had shifted nearly all their cars to front wheel drive and very few offered V8 engine options. Chrysler and Dodge made a bold, but successful move, when their engineers used many Mercedes-Benz components in their design. Sadly the Dodge Magnum has been discontinued; yet the Chrysler 300, Dodge Charger, and Dodge Challenger live on and are now in their second generation of production.

Stop searching for cold air intakes, Performance Air Intake System 63-1114 from K&N Filters is here for second generation Dodge Charger, Challenger, and Chrysler 300 with a Hemi V8 engine

While a 5.7 liter Hemi V8 engine commands respect in stock trim, many owners are searching for a Chrysler 300, Dodge Challenger or Dodge Charger cold air intake to increase power. If you’re that owner, look no further than K&N’s 63-1114 Performance Air Intake System. The 63-1114 is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, high-density polyethylene air intake tube to help minimize restriction, straighten, and increase airflow to the engine. More air means more usable power throughout the engine’s RPM range.

Dyno Chart - 2011 Dodge Charger 5.7 liter Hemi V8 gains an estimated 11.7 horsepower

K&N’s RF-1042 conical performance air filter is fitted to the inlet of the K&N K&N 63-1114 Performance Air Intake System to provide excellent airflow rates as well as outstanding filtration efficiency. The filter is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. Additionally, 63-1114 incorporates a heat shield which helps to direct relatively cold air entering through the factory inlet into the K&N Performance Air Filter, number RF-1042.

2012 Chrysler 300 LX Platform with 5.7 liter Hemi V8 Engine

The K&N 63-1114 Performance Air Intake System produces notable horsepower and torque increases worthy of the mighty 5.7 liter Hemi V8 engine. On the dyno, when installed on a 2011 Dodge Charger 5.7 liter Hemi V8, the K&N 63-1114 Performance Air Intake System produced an estimated additional 11.77 horsepower at 4513 rpm and 14.45 pound-feet of torque at 4494 rpm. Similar results can be expected for Chrysler 300 and Dodge Challenger 5.7 liter Hemi V8 equipped models.

The 63-1114 performance air intake system is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle. K&N backs the 63-1114 with the famous K&N Million Mile Limited Warranty so owners can rest assured that their intake system can stand up to tough conditions.

Performance Air Intake System 63-1114 is guaranteed to increase horsepower and torque on the Chrysler and Dodge models listed below:

2015 DODGE CHARGER 5.7L V8 F/I
2015 DODGE CHALLENGER 5.7L V8 F/I
2015 CHRYSLER 300C 5.7L V8 F/I
2015 CHRYSLER 300 5.7L V8 F/I
2014 DODGE CHARGER 5.7L V8 F/I
2014 DODGE CHALLENGER 5.7L V8 F/I
2014 CHRYSLER 300C 5.7L V8 F/I
2014 CHRYSLER 300 5.7L V8 F/I
2013 DODGE CHARGER 5.7L V8 F/I
2013 DODGE CHALLENGER 5.7L V8 F/I
2013 CHRYSLER 300C 5.7L V8 F/I
2013 CHRYSLER 300 5.7L V8 F/I
2012 DODGE CHARGER 5.7L V8 F/I
2012 DODGE CHALLENGER 5.7L V8 F/I
2012 CHRYSLER 300C 5.7L V8 F/I
2012 CHRYSLER 300 5.7L V8 F/I
2011 DODGE CHARGER 5.7L V8 F/I
2011 DODGE CHALLENGER 5.7L V8 F/I
2011 CHRYSLER 300C 5.7L V8 F/I

For all K&N Dodge Charger, Challenger, and Chrysler 300 air intakes visit the Dodge Charger Air Intakes, Dodge Challenger Air Intakes, and Chrysler 300 Air Intakes pages on KNFilters.com.

The heat shield of 69-5311TTK helps direct air entering the factory fresh air scoop into the engine of the Hyundai Genesis Coupe Turbo

The Hyundai Genesis Coupe is a rear wheel drive sports coupe imported from South Korea. The 2.0 liter, four-cylinder, Theta TCi turbo engine was developed as part of a global engine manufacturing alliance between Hyundai, Mitsubishi, and Chrysler. As a result, the turbo engine used in the Genesis Coupe shares many components with the venerable Mitsubishi EVO X. The 2013 model year saw several updates to the 2.0 liter Theta Tci 4-cylinder engine, including a larger turbo. This resulted in over 60 additional horsepower when compared to the 2012 model.

Performance Air Intake System 69-5311TTK from K&N Filters increases horsepower on the 2013-2014 Hyundai Genesis Coupe Turbo

While the engine is rated at over 270 horsepower from the factory, there is always room for more performance. Owners of the 2013 and 2014 Hyundai Genesis 2.0L seeking this extra boost in power can now install the 69-5311TTK performance air intake system. 69-5311TTK from K&N is precision-engineered to be a simple-to-install performance add-on. The backbone of this intake system is a free-flowing mandrel-bent aluminum intake tube which helps to minimize restriction, allowing your engine to breathe easier. A durable black powder coated finish is applied to the tube, providing a sleek appearance under the hood that will look great for years to come.

2013 Hyundai Genesis Coupe turbo gains an estimated 16.67 more horsepower

K&N equips the 69-5311TTK with the oversized RC-4630XD air filter, providing a large surface to help increase airflow while providing outstanding engine protection. The filter is made with K&N’s famous high-flow filter media so it’s washable and reusable and can even go up to 100,000 miles between cleanings, depending on driving conditions. To top it all off, a heat shield shrouds the air filter under the hood, helping to direct air entering the factory fresh air scoop into the engine.

All of the design features of the 69-5311TTK performance air intake system work in perfect harmony to deliver increased performance. On the dyno, 69-5311TTK produced an estimated additional 16.67 horsepower at 4014rpm and an amazing 29.94 pound-feet of torque at 3119rpm over the factory system.

The 69-5311TTK performance air intake system is an excellent upgrade for your 2013 or 2014 Hyundai Genesis Coupe equipped with the 2.0 liter turbo engine. With simple to follow instructions and no need to make any other modifications to the vehicle, you’ll be on the road in approximately 90 minutes with more horsepower under your right foot.

If all that weren’t enough, K&N backs the 69-5311TTK with the industry-leading K&N Million Mile Limited Warranty. If you’re looking to take your 2013 or 2014 Hyundai Genesis Coupe 2.0 liter turbo to the next level, look no further than the 69-5311TTK Typhoon air intake system.

Performance Air Intake System 69-5311TTK fits:

2014 Hyundai Genesis Coupe 2.0L
2013 Hyundai Genesis Coupe 2.0L

For all K&N Hyundai Genesis Coupe air intakes visit the Air Intakes for Hyundai Genesis Coupe page on KNFilters.com.

Tim Martin, Chief Operations Officer of K&N, has over 25 years of business experience in a variety of industries

SEMA, an acronym for the Specialty Equipment Market Association, was founded in 1963 by a group of like-minded automotive performance enthusiasts. SEMA currently represents over 6,500 member-companies, and helps to protect the rights of a consumer to personalize their vehicles. K&N Engineering Inc., a manufacturer of performance air filters and intake systems, has been a member of SEMA since 1975.

Tim Martin has served as a Vice President at K&N for years, and has recently been made the Chief Operations Officer. Tim is passionate about racing, performance, and the street car customization lifestyle. Tim’s wealth of experience, including serving as a member of the SEMA Business Technology Committee, and passion for the automotive aftermarket industry, inspired him to run for a seat on the SEMA Board of Directors.

Tim Martin will be recognized as a newly elected SEMA board member during the SEMA Installation Gala on Friday, July 18. During this banquet outgoing board members will be recognized and there will be a special tribute to new SEMA hall of fame inductees.

More horsepower, torque, and a touch of class for Duramax Diesel engines with Performance Air Intake System 77-3077KP, from K&N

2011 marked significant changes for the Isuzu designed Duramax diesel engine used in the Chevrolet Silverado and GMC Sierra 2500 / 3500 HD pickups. General Motors made changes to enhance durability, lower emissions, and at the same time increase power output. This latest generation of the Duramax diesel received the engine code LML and replaced the outgoing LMM engine. While GM did their homework to produce a solid engine for their heavy-duty line of pickups, K&N engineers saw the potential for even more improvement.

K&N Performance Air Intake System, 77-3077KP, from K&N Filters features a special 6-ply high-flow air filter for demanding environments encountered by Duramax Diesels

K&N 77-3077KP Performance Air Intake System is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, mandrel bent aluminum air intake tube to help minimize restriction, straighten, and increase airflow to the engine. The mandrel bent aluminum intake tube is finished with a chrome-like appearance for a custom look under the hood. The 77-3077KP incorporates a heat shield which helps guard air entering the engine from ambient heat.

Dyno Chart - 2013 Chevrolet Silverado 3500 HD LML 6.6L Diesel V8 gains an estimated 12.19 horsepower and 24.71 lb-ft of torque

Diesels pickups are operated in highly demanding environments, and because of this Air intake system, part number 77-3077KP, includes K&N’s RC-5179 conical air filter fitted to the inlet of the air intake system. K&N’s RC-5179 incorporates an extra special weave of cotton gauze, 6 layers thick, pressed between our wire mesh, then formed into deep 1-1/4” pleats. These extreme duty filters provide excellent airflow rates as well as outstanding filtration efficiency. RC-5179 is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. Use of a K&N Recharger Kit, number 99-5000 or 99-5050, is recommended when it comes time to clean RC-5179.

Trucks like this 2011 Chevy Silverado 2500 HD 6.6 liter Duramax Diesel V8 benefit from increased airflow and outstanding filtration

K&N Performance Air Intake Systems are designed to perform as good as they look. The K&N 77-3077KP air intake system puts down impressive performance gains in horsepower and torque. On the dyno, when installed on a 2013 Chevrolet Silverado 3500 HD 6.6 liter V8 diesel, the 77-3077KP air intake system produced an estimated additional 12.19 horsepower at 2850 rpm and an impressive 24.71 pound-feet of torque at 2346 rpm.

The 77-3077KP Performance Air Intake System is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle.

K&N backs the 77-3077KP air intake system with the famous K&N Million Mile Limited Warranty so owners can rest assured that their intake system will stand up to tough conditions. 2011 to 2014 Chevy or GMC Duramax diesel owners can rely on the K&N 77-3077KP air intake system to provide durable and reliable increased performance for years to come.

Performance Air Intake System, 77-3077KP, is guaranteed to increase horsepower and torque on the Chevrolet and GMC models listed below:

2014 GMC SIERRA 3500 HD 6.6L V8 Dsl
2014 GMC SIERRA 2500 HD 6.6L V8 Dsl
2014 CHEVROLET SILVERADO 3500 HD 6.6L V8 Dsl
2014 CHEVROLET SILVERADO 2500 HD 6.6L V8 Dsl
2013 GMC SIERRA 3500 HD 6.6L V8 Dsl
2013 GMC SIERRA 2500 HD 6.6L V8 Dsl
2013 CHEVROLET SILVERADO 3500 HD 6.6L V8 Dsl
2013 CHEVROLET SILVERADO 2500 HD 6.6L V8 Dsl
2012 GMC SIERRA 3500 HD 6.6L V8 Dsl
2012 GMC SIERRA 2500 HD 6.6L V8 Dsl
2012 CHEVROLET SILVERADO 3500 HD 6.6L V8 Dsl
2012 CHEVROLET SILVERADO 2500 HD 6.6L V8 Dsl
2011 GMC SIERRA 3500 HD 6.6L V8 Dsl
2011 GMC SIERRA 2500 HD 6.6L V8 Dsl
2011 CHEVROLET SILVERADO 3500 HD 6.6L V8 Dsl
2011 CHEVROLET SILVERADO 2500 HD 6.6L V8 Dsl

For all K&N Chevrolet Silverado 2500 / 3500 and GMC Sierra 2500 / 3500 HD pickups air intakes visit the Chevrolet Silverado 2500 Air Intakes, Chevrolet Silverado 3500 Air Intakes, GMC Sierra 2500 Air Intakes and GMC Sierra 3500 HD Air Intakes pages on KNFilters.com.

The 77-3082KP intake system’s bright intake tube looks good under the hood of this 2014 Chevrolet Silverado

These days a full-size pickup truck or SUV does more than just throw a mean hook. A modern full-size pickup truck or SUV must have refined interiors with modern-day technology, a comfortable platform that is refined on-road, yet rugged off-road and it must have style. In other words it has to float like a butterfly but sting like a bee. Some might think this isn’t doable, but General Motors seems to have stepped on the scale and made weight with the fully-redesigned 2014, 2015 and 2016 Chevrolet Silverado, Tahoe, Suburban, their GMC brethren the Sierra, Yukon, Yukon XL and the luxurious Cadillac Escalade. While the 5.3 liter EcoTec V8, and the available 6.2L V8 pack a punch in stock form, who doesn’t want to become the undisputed champion? As they’d say in boxing, installing a K&N 77-3082KP Performance Air Intake System can follow up an already ample punch with a one-two combo. The 77-3082KP intake system is a real knock-out, packing both added performance and increased style.

K&N Air Intake System for 2014-2016 Chevy / GMC Trucks and SUV’s with EcoTec 3 V8 Engines

The K&N 77-3082KP performance air intake system is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, mandrel-bent aluminum air intake tube to help minimize restriction, straighten, and increase airflow to the engine. The intake tube is then finished with a bright, chrome-like, finish for good looks and durability. K&N’s RF-1041 chrome top conical air filter is fitted to the inlet of the intake system to provide excellent airflow rates as well as outstanding filtration efficiency. The filter is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. 77-3082KP incorporates a heat shield which helps to guard cooler air entering the engine from ambient heat.

Dyno Chart for K&N 2014-2016 Chevrolet Silverado 1500 5.3L Air Intake 77-3082KP

Because the 77-3082KP Performance Air Intake System is designed to decrease restriction, and increase airflow, it is able to make impressive performance gains in horsepower and torque throughout the entire RPM range. On the dyno, when installed on a 2014 Chevrolet Silverado 5.3 liter V8, the K&N 77-3082KP performance air intake system produced an estimated additional 12.27 horsepower at 5237 rpm and 10.48 pound-feet of torque at 3602 rpm. When installed on a 2015 Chevrolet Tahoe 5.3 liter V8, the 77-3082KP performance air intake system produced an estimated additional 13.46 horsepower at 5341 rpm and 11.33 pound-feet of torque at 4388 rpm.

K&N Air Intake System for 2014 & 2015 Chevy / GMC Trucks and SUV’s with EcoTec 3 V8 Engines

The K&N 77-3082KP Performance Air Intake System is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle. K&N backs 77-3082KP with the famous K&N Million Mile Limited Warranty so owners can rest assured that their intake system can stand up to tough conditions.

Whether the 2014, 2015 or 2016 Chevy or GMC is used as a reliable daily driver or a dedicated workhorse, the K&N 77-3082KP Performance Air Intake system will provide increased performance and style for years to come.

Performance air intake system 77-3082KP is guaranteed to increase horsepower and torque on the Chevrolet and GMC models listed below:

2016 GMC YUKON XL 5.3L V8 F/I
2016 GMC YUKON DENALI XL 6.2L V8 F/I
2016 GMC YUKON DENALI 6.2L V8 F/I
2016 GMC YUKON 5.3L V8 F/I
2016 GMC SIERRA 1500 6.2L V8 F/I
2016 GMC SIERRA 1500 5.3L V8 F/I
2016 CHEVROLET TAHOE 5.3L V8 F/I
2016 CHEVROLET SUBURBAN 5.3L V8 F/I
2016 CHEVROLET SILVERADO 1500 6.2L V8 F/I
2016 CHEVROLET SILVERADO 1500 5.3L V8 F/I
2016 CADILLAC ESCALADE ESV 6.2L V8 F/I
2016 CADILLAC ESCALADE 6.2L V8 F/I
2015 GMC YUKON XL 5.3L V8 F/I
2015 GMC YUKON DENALI XL 6.2L V8 F/I
2015 GMC YUKON DENALI 6.2L V8 F/I
2015 GMC YUKON 5.3L V8 F/I
2015 GMC SIERRA 1500 6.2L V8 F/I
2015 GMC SIERRA 1500 5.3L V8 F/I
2015 CHEVROLET TAHOE 5.3L V8 F/I
2015 CHEVROLET SUBURBAN 5.3L V8 F/I
2015 CHEVROLET SILVERADO 1500 6.2L V8 F/I
2015 CHEVROLET SILVERADO 1500 5.3L V8 F/I
2015 CADILLAC ESCALADE ESV 6.2L V8 F/I
2015 CADILLAC ESCALADE 6.2L V8 F/I
2014 GMC SIERRA 1500 6.2L V8 F/I
2014 GMC SIERRA 1500 5.3L V8 F/I
2014 CHEVROLET SILVERADO 1500 6.2L V8 F/I
2014 CHEVROLET SILVERADO 1500 5.3L V8 F/I

For all K&N Chevrolet Silverado 1500, Chevrolet Tahoe, Chevrolet Suburban, Cadillac Escalade, GMC Sierra 1500 and GMC Yukon air intakes visit the Chevrolet Silverado 1500 Air Intakes, Chevrolet Tahoe Air Intakes, Chevrolet Suburban Air Intakes, Cadillac Escalade Air Intakes, GMC Sierra 1500 Air Intakes and GMC Yukon Air Intakes pages on KNFilters.com.