The store will not work correctly when cookies are disabled.
Nous utilisons les cookies pour vous offrir une meilleure expérience utilisateur.Pour se conformer à la nouvelle directive concernant la vie privée, nous devons vous demander votre consentement pour sauvegarder des cookies sur votre ordinateur. En savoir plus.
Performance Air Intake Installed on Hyundai Veloster
Have you ever wondered what a 3-door, no wait, a 4-door hatchback back from one of the fastest growing car manufacturers in the world would look like? Well look no further than the sporty 2011 to 2016 Hyundai Veloster with 1.6 liter engine. You can't help but smile while looking at the grill that just grins right back at you. From its sporty design to its functional layout, the Hyundai Veloster is an all-around well designed hatchback. Its peppy 1.6 liter, 138 horsepower motor gives it enough get up and go to make driving fun on the highway or through some nice twisty roads. But with nearly every vehicle owner, more power is always nice. K&N agrees and that is why they offer Hyundai Veloster owners a simple fix: a high performance air intake system 69-5304TS.
K&N Hyundai Veloster Air Intake System
K&N 69-5304TS air intake system is designed around three basic premises; ease of installation, quality of materials and, and of course more horsepower. Veloster owners can rejoice in knowing that K&N's intake system is made from durable aluminum tubing with a just-as-durable Silver powder coated finish. The 69-5304TS was designed to reduce air restriction using Computational Fluid Dynamics software. It has been dyno tested to establish an estimated increase of horsepower. With an estimated jump of 6.4 horsepower at 6400 RPM and 5.4 lb.-ft. of torque at 4200 RPM, K&N's performance intake 69-5304TS breathes new life into the Veloster's 1.6 liter motor.
Dyno Chart for K&N Hyundai Veloster Air Intake 69-5304TS
The 69-5304TS performance air intake system uses the factory mounting points so no modifications to the Hyundai Veloster is needed. Simply remove the stock, restrictive intake system and install K&N's high performance air intake system following the easy to read installation instructions. K&N's Hyundai Veloster air intake provides a connection on the tube for the factory crankcase vent hose and uses a heat shield so cooler outside air enters the engine.
A washable and reusable performance air filter (part RU-4600) comes ready to install and provides excellent filtration while allowing plenty of air to flow into the starving motor. Good for up to 100,000 miles before cleaning, depending on driving conditions, K&N's RU-4600 performance air filter is a tough act to beat! But what if your driving conditions are much dirtier than normal?
Hyundai Veloster with K&N Air Intake System
K&N has the solution to this problem also, with the optional 22-8036PK air filter wrap. K&N 22-8036PK PreCharger® filter wrap helps extend the service life of the filter by capturing and blocking larger dirt particles while adding minimal restriction to the air flow into the filter. It's a win-win combination!
The best part about K&N air intake 69-5304TS, besides the horsepower increase, is that the whole high performance intake system is backed by K&N's industry leading Million Mile Limited Warranty. In other words, this is the last air intake system your Hyundai Veloster will ever need.
The K&N Typhoon Performance Air Intake System 69-5304TS will fit the following Hyundai Veloster models:
Other articles: K&N Replacement Air Filter for 2013 Hyundai Genesis Coupe 2.0L Offers Lifetime Performance; Rhys Millen Racing Returns to Pikes Peak Hill Climb to Defend Hyundai Record; Modified 2010 Hyundai Genesis Coupe Ready for Redline Time Attack.
There is not much more exciting than looking forward to what a vehicle manufacture, like Jeep, will unveil each year and what can be added to make the vehicle even better. Because of this, the iconic Jeep Wrangler has been a hit with automotive enthusiasts from advanced off-road explorers to everyday driver. Owners have grown to love the classic trail blazing Jeep Wrangler who has boosted the fun factor even more with the addition of Chrysler's 285 horsepower Pentastar engine.
Air Intake System for 2012 to 2016 Jeep Wrangler
K&N has made it even more exciting for those who are looking for more horsepower and performance in their
For owners of
2012 to 2016 Jeep Wranglers with 3.6 liter engines who are looking for more power and performance, K&N offers Performance Air Intake System 63-1566. Simply install air intake system 63-1566 and take advantage of the estimated 12.2 horsepower gain at 5600 RPM and 8.9 feet pound of torque at 4188 RPM.
This K&N air intake reduces air restriction for more power and better throttle response.
K&N Jeep Wrangler Air Intake Dyno Chart
Air intake system 63-1566 includes a high density polyethylene intake tube, a reusable high flow K&N air filter and a sturdy powder coated metal heat shield. In addition, the air intake system also incorporates an NPT fitting and vent hose for the stock crankcase vent system as well as a spot for the stock air intake temperature sensor. Performance air intake 63-1566 is designed to bolt directly to factory mounting points with no cutting or drilling required. All of these high quality components can be installed by following the detailed step by step instruction sheet that is included with the air intake system. On average K&N's 63-1566 air intake for Jeep Wrangler models takes less than 90 minutes to install.
The K&N high flow air filter (RF-1048) included with the system is washable and reusable eliminating the need to constantly buy replacement air filters, all while continuing to provide excellent engine filtration and performance. Servicing K&N's reusable air filter is quite simple and the filter can last up to 100,000 miles between cleaning, depending on driving conditions. Cleaning is easy with either K&N Recharger® Kit 99-5000 or 99-5050.
K&N air intake 63-1566 offers better performance, more horsepower and a reusable air filter in an easy-to-install bolt-on performance upgrade that's backed by K&N's Million Mile Limited Warranty.
K&N performance air intake system 63-1566 will fit the following Jeep Wrangler models:
2016 Jeep Wrangler 3.6L V6
2015 Jeep Wrangler 3.6L V6
2014 Jeep Wrangler 3.6L V6
2013 Jeep Wrangler 3.6L V6
2012 Jeep Wrangler 3.6L V6
With SEMA 2012 in their sights, car owner, Carlos Islas and 742 Marketing CEO, Jeff Maldonado, began to devise a game plan. The Nissan 370z would lend to a perfect build for the show, with Maldonado and his crew being experts at building vehicles for such venues. Referring to his company, Maldonado explained, "We specialize in project vehicle builds for shows like SEMA and CES."
Nissan 370z aka Project Carbon Z at SEMA
Having attended SEMA events for the past six years, the builder was no stranger to what lies in store at the fruition of the project. "It takes a lot of hard work and time," he explained. From the time the SEMA week finishes, we are already planning and working on the next year's vehicles. It seems easy to just pick a car and get parts for it," he continued. "But in reality, it's hard to choose the right vehicle to help market products..."
K&N air intakes on custom Nissan 370z at SEMA
The CEO is acutely aware that having a history in the industry proves advantageous in the choosing and building process. "As we grow, we gain a lot more experience," he ensured. We specialize in finding newer or specific type vehicles that our affiliates are looking for. You could say we're the middleman between K&N and those aspiring to be sponsored."
With all of their ducks in a row, the team named what they considered as one of the most important builds they had embarked upon, "Project Carbon Z." As one might suspect, the team had a specific goal in mind; they aspired to produce a vehicle that would of course stand out from the rest but would continue to maintain a street look.
Dual air intake system for SEMA featured Nissan 370z
In fact, they strived to ensure the vehicle could be driven on a daily basis. It was essential to turn heads at SEMA 2012, but they wanted to showcase all of the products used in the build to the general population as well. It was of utmost importance that those traveling the streets and freeways had the opportunity catch a glimpse of the finished product.
With a bulk of the planning behind them, it was finally time to start making modifications to the Nissan, some of which took place under the hood. Eager to provide an ample air flow, which would increase the engine's overall performance, they went with a K&N's double air intake system 69-7078TS. Logic tells us that the amount of air flowing into the engine must be able to escape at the combustion process' end. So with that in mind, the team turned to an ARK performance exhaust system. An Odyssey Battery was also added to the mix to ensure there was plenty of juice to keep the electronics happy.
The Project Carbon Z outside SEMA North Hall
The builders chose Carbon Creations to provide the carbon fiber body parts. In fact, the company's workmanship lent to some of the vehicle's most radical and obvious changes to the onlooker. The company brought a hood, trunk, spoiler, lipkit and a wing to the build.
Air Runner played their part in the project as well with an air suspension and R1 provided the custom rotors. For the finishing touches on the car's exterior, Concept One wheels were added to the mix.
Conecpt One Wheels & R1 Custom Brake Rotors on SEMA Nissan 370z
Referring to the K&N double intake used in the project, Maldonado said, I started using them in 2005. According to the builder the product's selling point was two-fold. Not only did he notice an increase in power , but the sound was "just perfect."
Once SEMA 2012 was behind them, that was no indication that their project would simply sit idle. In fact, it has since been featured in a German magazine, on a variety of online videos and in various other magazines for advertising purposes.
SEMA featured Nissan 370z demands attention
As Maldonado shared their upcoming goals, it quickly became evident that much thought has already gone into future plans. "We are in discussion about bringing back the Z to SEMA 2013 with a different look," he explained. "Something different and unique."
In closing he continued, "K&N has been a big part of the growth of 742 Marketing in the past years, and every time, they go that extra mile to help us out. We are not your typical marketing firm. We are known for grass-roots marketing. That's something I feel K&N found special about us, and for that we thank them."
Dylan Kwasniewski won the DRIVE4COPD 125 at Bristol Motor Speedway in Tennessee
Dylan Kwasniewski has already conquered the NASCAR K&N Pro Series West. He took his first step in conquest of the K&N Pro Series East. Kwasniewski won the DRIVE4COPD 125 at Bristol Motor Speedway in Tennessee, the season opener in the K&N Pro Series East.
K&N Pro Series West Champion Dylan Kwasniewski at Bristol Motor Speedway
"My car was working everywhere and I think that's what made us win the race," Kwasniewski said, "because we go could all the way high and all the way low without having any trouble at all."
He won the K&N Pro Series West championship last season with Gene Price Motorsports. Kwasniewski, a 17-year-old from Las Vegas, is competing in the K&N Pro Series East with Scott Turner Motorsports.
He took the lead in the race at Bristol on lap 30 and stayed out front for the final 96 laps of the race. It was his first race at Bristol and the first K&N Pro Series win for Scott Turner Motorsports.
"We definitely took to it pretty quick," Kwasniewski said. "To have a crew that gave me the best car possible, we went out there and I played around with the lines a little bit and got to where I needed to be and I knew what we needed to do to win that race."
DRIVE4COPD 125 Trophy at Bristol Motor Speedway goes to K&N Pro Series West Racer Dylan Kwasniewski
Rookie Michael McGuire won the pole and led the first 29 laps of the race. He was collected behind lapped traffic under caution and lost his lead to Kwasniewski.
"My car pretty much worked everywhere," Kwasniewski said. "The high lane was definitely good for trying to get tire management. I pretty much stayed in the middle to high just tried to keep my tires under me and make sure I had some stuff saved for the end. When I went down low, it was so fast down there. On the restarts, I definitely tried to get my car down there to gain that extra track position right away, to gain that gap right off the restart."
Brett Moffitt pressed Kwasniewski on seven restarts in the race, but couldn't pass for the lead. Moffitt crossed the finish line in second.
"It was fun racing," Moffitt said. "The outside groove was fun. It's not very many tracks we get to do that. That's what's great about Bristol. Glad to come out of here second."
Moffitt finished in third place in the K&N Pro Series East standings in 2012. The season opener at Bristol last year produced a 32nd place finish. His team is off to a much better start this year.
"We had a rough start last year," Moffitt said. "We came here just saying if we finish the race and beat 33rd or wherever then we'll have less of a hole to dig out of. That's what we did. It's a great weight lifted our shoulders to start the season in the top three, top two in points and hopefully we can stay there."
Ryan Gifford was third, followed by McGuire in fourth and CJ Faison in fifth.
"This is a good start to the year," said Gifford. "This kind of race shows us that what we did over the winter was going in the right direction. I think we'll be able to contend all year."
Kenzie Ruston, Kwasniewski's teammate at Scott Turner Motorsports, was 11th. It was the best finish by a female driver in a K&N Pro Series East race since Danica Patrick finished in sixth place at Dover International Speedway in 2010.
Kwasniewski recorded his sixth K&N Pro Series win in 29 career starts. His previous five K&N Pro Series wins came in the West. He has made four starts in the K&N Pro Series East.
"I go out there every weekend and I try to mess around with my team and have the time of my life when I'm out here," Kwasniewski said. "Even though I may miss the stuff back home, there's nothing better than going out and racing a race car, especially winning at Bristol. This track was so much fun. It's definitely one I can put a notch in my belt for."
The next K&N Pro Series East race is the Kevin Whitaker 125 at Greenville Pickens Speedway in South Carolina on March 23.
Michael Jordan Motorsports's new racing livery was inspired by the Air Jordan XX8 basketball shoe.
Here's a peculiar conundrum - why in the world is there a motorcycle parked in a glass elevator 103 flights above Chicago? The answer - because the Skydeck on the top of the Willis Tower (formerly the Sears Tower), is where Michael Jordan Motorsports was founded ten years ago. Michael Jordan, by most accounts the greatest NBA superstar ever, has no shortage of interests outside of basketball. In addition to honing his golf skills, owning the Charlotte Bobcats and serving as one of the most recognizable faces of the NBA, Michael Jordan is a colossal motorcycle racing enthusiast, and his race-winning team is celebrating its 10th anniversary in 2013. As a part of the festivity Michael Jordan Motorsports soared to extraordinary new heights in Chi-town as Danny Eslick unveiled the team's bike and new livery.
Danny Eslick unveiled the team's new colors 103 flights above Chicago.
Combining motorcycles with one of Michael Jordan's other loves - sneakers - has resulted in the creation of these strikingly distinctive Suzuki motorcycles that were inspired by the Air Jordan XX8, which also recently dropped at shoe stores everywhere. However, unlike Jordan's signature kicks, the Air Jordan inspired bikes will not be available for purchase. Instead, in addition to celebrating an impressive decade in road racing, the Michael Jordan Motorsports team will debut their new racing colors as the 2013 AMA Pro National Guard Superbike Championship season kicks off at Daytona International Speedway in Daytona Beach, Florida. This is the team's first time at the prestigious Daytona 200.
This is the team's first time competing at the prestigious Daytona 200.
For the 2013 season K&N has signed Michael Jordan Motorsports teammates, Danny Eslick (No. 23) and Daytona Superbike podium-finisher, Roger Lee Hayden (No.54). Both riders will be competing on a Jordan Suzuki GSX-R1000 donning the dynamic new colors. The team will also run James Rispoli's National Guard Celtic Racing Suzuki GSX-R600 (No. 43) and National Guard Celtic Racing teammate Corey Alexander (No. 5) in the new colors. Rispoli is a former Daytona SuperSport winner, while Alexander finished on the podium in that class last year.
"The whole Michael Jordan Motorsports team is looking forward to Daytona," said Kreig Robinson, MJM Vice President of Corporate Relations. "We expect solid results from Danny and Roger in AMA Pro National Guard Superbike, and we're excited about James racing the Daytona 200 for the first time. Additionally, we look forward to supporting Corey in AMA SuperSport. Overall, 2013 is a landmark season for Michael Jordan Motorsports as we reflect on the significance of a successful decade in road racing and the unlimited potential of the future."
