Neueste Nachrichten

World of Outlaws Donny Schatz Wins Cactus Classic

Donny Schatz and the ParkerStore Team were victorious Saturday night in the Cactus Classic at Manzanita Speedway in Phoenix. Schatz was in the mix for a total of two victories this past weekend in Arizona, but finished third in Friday night’s event at USA Race Park near Tucson.
Donny Schatz wins Cactus Classic in Arizona Donny Schatz wins Cactus Classic in Arizona

“Everyone can look at the results and say we’ve been consistent, but we need to win races, period,” said Schatz. “Winning races is the key to having a successful season. We were right there on Friday night before we had a problem with the motor, and ended up finishing third. We weren’t going to be happy unless we won on Saturday night, and the entire team did a great job to help us get the job done.”
Donny Schatz's ParkerStore J&J uses K&N ProductsDonny Schatz's ParkerStore J&J uses K&N Products

The Fargo, North Dakota racer began the weekend at USA Race Park by timing the third fastest in a 41-car field. During the 30-lap feature Craig Dollansky was involved in a crash just in front of the No.15 ParkerStore J&J. Schatz was able to avoid that accident.

When the feature restarted Schatz tracked down leaders Jason Sides and Steve Kinser. He was in second on lap 9 and focused on Kinser. He pulled even on one occasion, but wouldn’t be able to make another run at the lead. Schatz developed a problem with his engine and came home third behind Kinser and Joey Saldana.

The feature event on Saturday night was a duel of speed. Schatz chased starters Justin Henderson and Paul McMahan in the early stages. He worked his way around the bottom groove and top line to jump into second just before the ten lap mark. By lap 13, he drove past Henderson and began to pull away. Saldana put on a lot of pressure but Schatz maneuvered lapped traffic faster the final 12 laps of the race. The ParkerStore car was too quick and Schatz won the race.

“That was a tough race and those kind sure take a lot out of you, but I’m proud to get the win,” he said. “We were really good around the bottom in turns three and four, but I also had to run high to deal with the traffic. It feels great to get back to victory lane.”

In the 2007 World of Outlaws Season, Schatz has six finishes in the top three. He leads the series standings. Schatz and the ParkerStore Team use K&N Engineering products. “We know from our extensive research that K&N makes the best products to provide the maximum amount of airflow to our engines,” said Schatz. “The K&N Filters Carbon Sprint Airbox fits perfectly and gets the job done.”

Schatz and the ParkerStore Team return to the track on March 16 at Houston Race Park in Baytown, Texas.

Follow The Donny Schatz's progress throughout the racing season at the K&N news site. Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Top Alcohol Dragster Lindsey Wood Grabs Top Spot at NHRA Cajun Challenge

“I’ve got the Wally,” said Rookie Top Alcohol Dragster racer Lindsey Wood after she grabbed the No.1 spot from the NHRA Lucas Oil Drag Racing Series Challenge at No Problem Raceway. “We’ve got a long drive home from Belle Rose, Louisiana, but I’m excited.”

Top Spot no Problem for Lindsey Wood
Top Spot No Problem for Lindsey Wood
The 22-year-old McAlpin, Florida racer clocked in at 5.340 seconds at 264.86 mph in the Darien-Meadows owned dragster. Wood took over Ashley Force’s spot in Top Alcohol Dragster when Force made the move to Top Fuel Funny Car at the start of the 2007 season. “Everything just worked out,” said Wood. “I’ve got a great crew and a great car.”

Wood is followed in points by former NHRA Pacific Division Champion and current Top Fuel Dragster Morgan Lucas.

“K&N sponsored Lindsey at the Sportsman level and we will continue to support her,” said K&N Sports Marketing Director Charles Maier. “Lindsey is a nice fit for K&N. Lindsey uses a K&N Engineering Clutch Air Filter. It contains all the dust from the clutch and prevents a dust cloud as she launches.”

Gainesville is next up for Wood. She said she hopes to do as well at the Gatornationals.

Follow Lindsey Wood's progress throughout the racing season at the K&N news site. Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Nissan 240SX Owners Add 10.65 Horsepower with K&N Typhoon Air Intake System

The Nissan 240SX is one of the most common machines available for the sport of Drifting. Drifters control their cars with a unique way of steering during competition. Steering the wheel is almost ineffective while in a drift, so top drivers use the gas and brake to maneuver on the course. The Nissan 240SX was one of the top cars in the 2006 Formula D Championship. For everyday drivers the 240SX is also known for its great steering and handling.


Air Intake for Nissan 240SX 2.4L
Air Intake for Nissan 240SX 2.4L
K&N Engineering has designed a new 69-Series Typhoon Air Intake (69-7075TS) in silver for the 1991, 1992, 1993, and 1994 Nissan 240SX 2.4 liter engine. "This Typhoon Air Intake System uses the factory Mass Air Flow sensor, custom radius filter adapter, and a K&N High Flow Air Filter (RU-4600)," said K&N Project Technician Nestor Cabrera.

Power Gain Chart for Nissan 240SX with K&N Air Intake
Power Gain Chart for Nissan 240SX with K&N Air Intake
K&N dynamometer testing shows a 10.65 horsepower gain @ 4500 RPM for this Typhoon Intake. "The horsepower and torque gains are exceptional for an engine of this size," said Cabrera. "The K&N Air Filter also uses a specially designed radius adapter which helps provide smooth air flow into the intake tube."

The heat shield is designed with provisions for the factory fresh air duct. This allows the K&N Air Filter to receive a consistent flow of fresh cool air. In addition, the heat shield isolates the K&N Air Filter from the engine compartment.

The design of the Nissan played a major roll in the development of this Typhoon Air Intake System. K&N engineers took special care to ensure that this air intake followed the Nissan's lines and that it did not obstruct or rub against other parts in the engine.

It takes less than 90 minutes to install this kit with simple hand tools. K&N Typhoon air intake systems are designed to improve engine performance along with under the hood visual appeal.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Shelby Ford Mustang GT 500 Gains 53.71 HP with K&N Air Intake System

There is a magic combination in the automotive world that combines "Shelby" and "Mustang." It is the latest hot rod pony that has a supercharged 5.4 liter engine.

Air Intake for 2008 and 2009 Ford Mustang Shelby GT-500
Air Intake for Ford Mustang Shelby GT-500

57-2571 Air Intake Installed on Ford Mustang Shelby
Air Intake Installed on Shelby Ford Mustang

K&N has designed a 63-Series AirCharger Intake System (57-2571) for the 2008 and 2009 Ford Mustang Shelby GT-500 with 5.4 liter V8 engine. Dynamometer tests show a horsepower gain of 53.71 @ 5900 RPM with this air intake.
Power Gain Chart for Ford Mustang with K&N Air Intake
Power Gain Chart for Ford Mustang with K&N Air Intake


Ford Shelby Mustang gets 53.71 Extra Horsepower with K&N
Ford Shelby Mustang gets 53.71 Extra Horsepower with K&N

"One of the reasons for such a large power gain is the large K&N Air Filter (RF-1048)," said K&N Performance Kit Manager Bert Heck. "The factory air box was restricted in size and restrictive in air flow especially at higher RPMs. We made a larger intake tube that fit nicely under the front stabilizer bar."

"The tube is oval because the throttle body was oval. This also allowed the tube cross section to be larger," said Heck. "The large horsepower gain of this air intake is also due to the radius adaptor design as it smoothly takes the 6 inch flange of the air filter and mates it with the intake tube."

It takes less than 90 minutes to install this K&N AirCharger Air Intake System to virtually eliminate air path restriction and drive a massive amount of air into your engine. K&N Air Intake Systems also come with the famous K&N Million Mile Warranty.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Mazda 2 and Mazda 3 Owners Never Have to Replace an Air Filter Again with K&N

The compact Mazda 3 is available in two body styles, a four door sedan called a coupe in Europe, along with a five door hatchback in the United States. The Mazda 3 is based on Ford's global platform, developed by Volvo.

Air Filter for Mazda 2 and Mazda 3
Air Filter for Mazda 2 and Mazda 3
K&N Engineering's Lifetime Replacement Air Filter, 33-2924 is custom designed to fit in the factory air box of certain 2007 to 2014 Mazda 2 and Mazda 3 models. Simply remove the disposable air filter and replace it with K&N's Air Filter for high volume air flow.

K&N Air Filters are washable and reusable. 33-2924 is 0.875 inches in height (22mm) with an outside length of 12.25 inches (311 mm) and an outside width of 8.875 inches (225 mm).

More than 35 years of research and development has made K&N the leader in filtration. K&N Air Filters are made of 4 to 6 layers of cotton gauze sandwiched between two epoxy-coated aluminum wire screens. The cotton is treated with a specially formulated grade of oil. This causes tackiness throughout the cotton's microscopic strands. The nature of the cotton allows air flow, and when combined with the tackiness of the oil creates a powerful filtering media that ensures engine protection.

K&N makes stock replacement air filters for virtually every motorcycle and automobile on and off the road. K&N's stock air filters for street vehicles are covered by our famous K&N Million Mile Limited Warranty and will be the last air filter your vehicle will ever need.

The 33-2924 will fit the following vehicles:

2014 MAZDA 2 1.5L L4 F/I
2014 MAZDA 2 1.3L L4 F/I
2013 MAZDA 3 1.6L L4 F/I
2013 MAZDA 2 1.5L L4 F/I
2013 MAZDA 2 1.3L L4 F/I
2012 MAZDA 3 1.6L L4 F/I
2012 MAZDA 2 1.5L L4 F/I
2012 MAZDA 2 1.3L L4 F/I
2011 MAZDA 3 1.6L L4 F/I
2011 MAZDA 2 1.5L L4 F/I
2011 MAZDA 2 1.3L L4 F/I
2010 MAZDA 3 1.6L L4 F/I
2010 MAZDA 2 1.6L L4 Diesel
2010 MAZDA 2 1.5L L4 F/I
2010 MAZDA 2 1.3L L4 F/I
2009 MAZDA 3 1.6L L4 F/I
2009 MAZDA 2 1.6L L4 Diesel
2009 MAZDA 2 1.5L L4 F/I
2009 MAZDA 2 1.3L L4 F/I
2008 MAZDA 3 1.6L L4 F/I
2008 MAZDA 3 1.4L L4 F/I
2008 MAZDA 2 1.6L L4 Diesel
2008 MAZDA 2 1.5L L4 F/I
2008 MAZDA 2 1.3L L4 F/I
2007 MAZDA 3 1.6L L4 F/I
2007 MAZDA 3 1.4L L4 F/I
2007 MAZDA 2 1.6L L4 Diesel
2007 MAZDA 2 1.5L L4 F/I
2007 MAZDA 2 1.3L L4 F/I
2006 MAZDA 3 1.6L L4 F/I
2006 MAZDA 3 1.4L L4 F/I
2005 MAZDA 3 1.6L L4 F/I
2005 MAZDA 3 1.4L L4 F/I
2004 MAZDA 3 1.6L L4 F/I
2004 MAZDA 3 1.4L L4 F/I
2003 MAZDA 3 1.6L L4 F/I
2003 MAZDA 3 1.4L L4 F/I

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.