Ultimele știri

RIVERSIDE, CA - Powered by the LQ9 Generation III Small-Block the GMC Sierra and Sierra Denali are awesome utilitarian vehicles sporting many of the finest refinements in SUV manufacturing today. With the addition of a K&N Series-77 Intake Kit 77-3050KP, power, torque and acceleration are improved throughout the RPM band.

Utilizing K&N's High-Flow Air Filter technology, the 77-Series virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine with mandrel-bent 6063 aluminum tubing. Available in high-quality finishes, the 77-Series utilizes reinforced silicon hoses and stainless steel hose clamps. With the K&N Million Mile Limited Warranty you can give your Sierra or Denali awesome performance and filtration protection in less than three hours of installation time.

The 77-3050KP will also fit the following vehicles:

2007 GMC SIERRA DENALI CLASSIC 6.0L
2007 GMC SIERRA 1500 CLASSIC 5.3L
2007 GMC SIERRA 1500 CLASSIC 5.3L
2007 GMC SIERRA 1500 CLASSIC 4.8L
2007 CHEVROLET SILVERADO 1500 CLASSIC 5.3L
2007 CHEVROLET SILVERADO 1500 CLASSIC 5.3L
2007 CHEVROLET SILVERADO 1500 CLASSIC 4.8L
2006 GMC YUKON XL 1500 5.3L
2006 GMC YUKON DENALI XL 6.0L
2006 GMC YUKON DENALI 6.0L
2006 GMC YUKON 5.3L
2006 GMC YUKON 5.3L
2006 GMC YUKON 4.8L
2006 GMC SIERRA 1500 5.3L
2006 GMC SIERRA 1500 5.3L
2006 GMC SIERRA 1500 4.8L
2006 CHEVROLET TAHOE 5.3L
2006 CHEVROLET TAHOE 5.3L
2006 CHEVROLET TAHOE 4.8L
2006 CHEVROLET SUBURBAN 1500 5.3L
2006 CHEVROLET SILVERADO 1500 6.0L
2006 CHEVROLET SILVERADO 1500 5.3L
2006 CHEVROLET SILVERADO 1500 5.3L
2006 CHEVROLET SILVERADO 1500 4.8L
2006 CHEVROLET AVALANCHE 1500 5.3L
2006 CADILLAC ESCALADE 6.0L
2005 GMC YUKON XL 1500 5.3L
2005 GMC YUKON DENALI XL 6.0L
2005 GMC YUKON DENALI 6.0L
2005 GMC YUKON 5.3L
2005 GMC YUKON 5.3L
2005 GMC YUKON 4.8L
2005 GMC SIERRA DENALI 6.0L
2005 GMC SIERRA 1500 5.3L
2005 GMC SIERRA 1500 4.8L
2005 CHEVROLET TAHOE 5.3L
2005 CHEVROLET TAHOE 4.8L
2005 CHEVROLET SUBURBAN 1500 5.3L
2005 CHEVROLET SILVERADO SS 6.0L
2005 CHEVROLET SILVERADO 1500 5.3L
2005 CHEVROLET SILVERADO 1500 4.8L
2005 CHEVROLET AVALANCHE 1500 5.3L
2005 CADILLAC ESCALADE 6.0L
2005 CADILLAC ESCALADE 5.3L

For more information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.

* Application for CARB exemption was pending at the time this press release was written. If CARB exemption is required for your application, please contact K&N for current information on the status of its CARB application.

# # K&N # #

RIVERSIDE, CA - The 2002 to 2005 Chevy Trailblazer, 2002 to 2005 GMC Envoy and 2002, 2003 and 2004 Oldsmobile Bravada pack a lot of big SUV performance into a mid-size package. The 4.2L engine is big enough to handle most towing challenges, yet doesn't break the bank at the gas pump. But that doesn't mean these vehicles wouldn't benefit from greater horsepower and improved fuel economy, which is where the 77-Series Intake Kit (PN# 77-3036KP) from K&N Engineering comes into the picture!

The K&N 77-Series Intake Kit for the Chevy Trailblazer, GMC Envoy and Oldsmobile Bravada is designed to substantially increase airflow into the engine for maximum performance. The 77-Series Intake Kit starts with K&N's high-flow, washable and reusable air filter, which can go up to 100,000 miles between cleanings depending on driving environment. All of that clean air is then directed through K&N's aerodynamically-designed aluminum intake tube to provide a restriction-free path all the way to the engine. A cooler, more-dense air/fuel charge means even more power at the wheels, so the engine gurus at K&N also include a custom heat shield to protect the filter and keep things running cool. Covered by the famous K&N Million Mile Limited Warranty^®, the 77-Series Intake Kit is a snap to install (in 90 minutes or less with simple hand tools), has added almost 11 extra rear-wheel horsepower when tested on the K&N dynamometer and won't void the vehicle warranty!

For more information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.

* Application for CARB exemption was pending at the time this press release was written. If CARB exemption is required for your application, please contact K&N for current information on the status of its CARB application.

# # K&N # #

RIVERSIDE, CA - Nissan's first-ever full-size trucks have received rave reviews. K&N Engineering makes the 2005 to 2014 Nissan Armada SUV, 2004 Nissan Pathfinder, the impressive 2004 to 2014 Nissan Titan truck and the 2004 through 2010 Infiniti QX56 even more hype-worthy with the introduction of their High-Flow Fuel Injection Performance Kit, or FIPK^® (Part No. 57-6012). K&N engineers were able to unleash extra power and torque by eliminating the restrictive OE airbox and intake tract, replacing them with the FIPK^® Kit. Testing on K&N's Dynojet 248 dynamometer established a baseline of 254.07 HP on a stock 2004 Pathfinder 4x4. With the K&N FIPK^® Kit installed, the same vehicle averaged 265.28 HP, an increase of more than 11 horsepower!

Each K&N Intake Kit is engineered to virtually eliminate incoming-air restrictions. The process begins by choosing the largest conical K&N High-Flow Air Filter that will easily fit in the engine compartment. The filter's design increases airflow and its size traps more dirt, increasing service intervals up to 100,000 miles (depending on driving conditions). K&N High-Flow Air Filters are backed by the famous K&N Million Mile Limited Warranty^® and can be repeatedly cleaned and re-oiled with a K&N Recharger^® Kit (sold separately).

To further increase power, the filter is isolated from high engine temperatures by a heatshield. Also, K&N aerodynamically engineers the FIPK's intake tube specifically for the Armada/Titan using roto-molded high-density polyethylene, allowing the tube to be optimally shaped for minimize turbulence and improved airflow. The FIPK^® includes a mass-airflow sensor adapter that's strategically placed to work with factory equipment while permitting increased power.

Installation is purely bolt-on and uses factory holes: No drilling is required, and the average do-it-yourselfer can replace the stock airbox and intake tract with an FIPK^® using only common hand tools in about 90 minutes. The kit comes complete with all mounting hardware, nylon-reinforced silicon hose adapters and stainless-steel barrel clamps. The FIPK^® for the Armada, Pathfinder, Titan and QX56 is street-legal in most states.

K&N also offers two replacement filters for the stock Armada/Titan: a washable/reusable High-Flow Air Filter (PN 33-2286) and a Performance Gold Oil Filter (PN HP-1010).

For additional information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.

# # K&N # #

RIVERSIDE, CA - Inspired by the heart and soul of the 1960s the GTO has been dubbed the meanest, most powerful midsize American sports coupe in production. Backed by a six-speed manual transmission and independent rear suspension the 2004 GTO sports a 350 horsepower LS1 that begs for the additional benefits and performance K&N has been offering for more than 35 years.

By replacing your factory air intake assembly with K&N's 57-Series Fuel Injection Performance Kit (FIPK), 57-3044, your engine gets cool, dense air with less restriction. Producing an additional 18 rear wheel horsepower on K&N's in-house Dynojet 248 dyno, the FIPK utilizes K&N's high-flow, washable and reusable air filter, low-restriction air intake plumbing and a custom designed heat shield. Made for the do-it-yourselfer K&N's FIPK can be installed in 90 minutes or less with common hand tools. Best of all, K&N Intake Kits protect engines without voiding the factory warranty.

For more information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.

* Application for CARB exemption was pending at the time this press release was written. If CARB exemption is required for your application, please contact K&N for current information on the status of its CARB application.

# # K&N # #

RIVERSIDE, CA - Get more power and improved throttle response from your 2004, 2005, 2006 and 2007 Jeep^® Liberty 3.7L V-6 engine with a K&N 57-Series Fuel Injection Performance Kit (FIPK^®), PN 57-1540. The high-flow low restriction High-Flow Air Filter element is the cornerstone of the FIPK^® system. This filter can be cleaned dozens of times, and will save you money over the life of your Jeep^® Liberty. The engineers at K&N developed and dyno-tested the various components of the FIPK^® kit to extract hidden horsepower from the Jeep^® Liberty 3.7L engine by giving it what it needs to make power - more air.

Surrounding the High-Flow Air Filter element is a heat reflective metal shield. By isolating the K&N High-Flow Air Filter from engine heat, the shield helps keep incoming air cool for a denser, more powerful intake charge. Incoming air is further isolated from engine heat by a composite tube that connects the High-Flow Air Filter to the fuel injection intake. This tube is designed to optimize airflow velocity in order to improve throttle response and torque throughout the entire rpm range. You'll also love the throaty engine sound that the K&N FIPK^® kit unleashes from your Jeep^® engine at full throttle.

K&N FIPK^® kit for Jeep^® Liberty bolts on easily in under 90 minutes and requires only basic hand tools for installation. All K&N FIPK^® kits are 50-state legal and the High-Flow Air Filter element is backed by the famous K&N Million Mile Limited Warranty . For more information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.

* Application for CARB exemption was pending at the time this press release was written. If CARB exemption is required for your application, please contact K&N for current information on the status of its CARB application.

# # K&N # #