Używamy cookies aby ułatwić korzystanie ze sklepu. Zgodnie z dyrektywą dotyczącą prywatności w sieci, musimy zapytać o Twoją zgodę na zapisywanie plików cookies. Dowiedz się więcej.
2014 Mitsubishi Lancer Evolution GSR 2.0L L4 Gas Air Intake
Dolot powietrza - wysokoprzepływowy, aluminiowa rura - MITSUBISHI LANCER EVO GSR L4-2.0 dla 2014 mitsubishi lancer-evolution-gsr 2.0l l4 gas
All Models
2 834,79 zł
W magazynie
Podgląd
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty.
Szczegółowe informacje
| Estimated Horsepower Gain | 21.42 HP @ 6100 RPM |
| Replacement Filter | RF-1047 |
| Air Filter Color | Red |
| Air Filter Material | Cotton Gauze |
| Air Filter Outlet Shape | Round |
| Clamps Included | 11 |
| Clamp Material | Stainless Steel |
| Clamp Style | Regular |
| Couplers Included | 5 |
| System Type | Cold-Air Intake System |
| Estimated Torque Gain | 18.4 lbft |
| Product Style | 69 Series Typhoon Kits |
| Intake Pipe Color / Finish | Wrinkle Red |
| Intake Pipe Material | Aluminum |
| CARB EO Number | D-269-42 |
| Street Legal In All US States | Not legal for sale or use in California on any pollution controlled motor vehicle. NOTE: Some specific models and years may be legal in CA. Check the CARB status on your parts at knfilters.com. |
| TUV Approved (Europe) | No |
| Weight | 10 lb (4.5 kg) |
| Product Box Height | 14.5 in (368 mm) |
| Product Box Length | 24.1 in (612 mm) |
| Product Box Width | 15.5 in (394 mm) |
| Mounting Hardware Included | Yes |
| Warranty | No-Hassle Lifetime Limited |
DIY Level
Łatwy Średni Zaawansowany
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes
Cold Air Intake System dla 2014 mitsubishi lancer-evolution-gsr 2.0l l4 gas
All Models
2 534,09 zł
W magazynie
Podgląd
- Increased horsepower
- Tuned and dyno-tested to improve acceleration and engine sound
- Low restriction aluminum tubing
- Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
- Washable and reusable oil-free filter media
Szczegółowe informacje
| Estimated Horsepower Gain | 17 HP @ 4100 RPM |
| Replacement Filter | 21-203DK |
| Air Filter Color | Red |
| Air Filter Material | Non-woven Synthetic |
| Air Filter Outlet Shape | Round |
| Clamps Included | 5 |
| Clamp Material | Steel |
| Clamp Style | Regular |
| Couplers Included | None |
| Product Style | AEM Cold Air Intake System |
| Intake Pipe Color / Finish | Gunmetal Gray |
| Intake Pipe Material | Aluminum |
| CARB EO Number | D-670-26 |
| Street Legal In All US States | Legal for use in all 50 states. |
| TUV Approved (Europe) | No |
| Weight | 9 lb (4.1 kg) |
| Product Box Height | 12.25 in (311 mm) |
| Product Box Length | 20.25 in (514 mm) |
| Product Box Width | 12.25 in (311 mm) |
| Mounting Hardware Included | Yes |
| Warranty | Limited Lifetime |
DIY Level
Łatwy Średni Zaawansowany
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes
Zasoby:
PDF instalacji
Installation Instruction Sheet Dyno Chart - 2008 Mitsubishi Lancer Evolution 2.0L - 17HP Increase
Search By Vehicle
Search By Dimension
Przedmiot, który dodałeś do koszyka, NIE PASUJE do Twojego pojazdu
Ten przedmiot pasuje do Twojego pojazdu
