Dernières Nouvelles

K&N 81-1012 inline fuel/oil filter

Henry Ford once said: "Auto racing began 5 minutes after the second car was built". This is probably true, because auto racing can be traced back to the late 1800's, when goggle-wearing rich guys would get together and flog their 'horseless carriages' down rutted dirt roads. The sport, and the car, has evolved considerably since then. To keep pace, racing fuels and lubricants have become scientific blends that are designed to provide more power, and more reliability. But no matter how advanced racing fuel or racing oil is, a certain amount of contaminants still escape the refining and storage process. Which is why you need to protect your expensive race engine with a K&N 81-1012 inline fuel/oil filter.

Components of the K&N 81-1012 inline fuel/oil filter

K&N 81-1012 inline fuel/oil filters are designed to be the last line of defense for your engine, against the harmful contaminants in both your fuel, and the fuel system itself. Fine particles of rust, scale and dirt can hide in the fuel system, until the fuel finally dislodges the contaminants, and delivers them to the fuel pump or fuel injectors/carburetor jets. The fuel that you run can also damage the fuel system and engine due to microscopic contaminants left behind by the additives. This is especially an issue with high octane race fuels, and methanol.

K&N 81-1012 inline fuel filter and inline oil filter is a low restriction inline filter that can be added into your existing fuel system, oiling system, or dry sump setup. To give it excellent corrosion resistance and high pressure capability, the case is machined from a billet of anodized aluminum. Each end also features Viton seals, because this synthetic rubber compound can withstand corrosive fuels and high temperatures far better than ordinary rubber seals. High volume filtration is handled by the internal 74-micron stainless steel filter element. This durable K&N filter media can be easily cleaned and reused, allowing for quick fuel system adjustments, and reduced cost.

The K&N 81-1012 Inline Fuel/Oil Filter can be used in your street car, diesel pickup, or race car. This reusable billet aluminum fuel filter can handle everything from pump gas to methanol. And it can be used for racing applications, in NASCAR, NHRA, sprint cars, off-road racing, motocross, and marine racing. K&N makes other performance parts to fit your race car, including carbon fiber scoops, high-volume fuel pumps, and a whole lot more. Check out the complete line of K&N Performance Parts, use the Search by Vehicle Tool, or find a K&N dealer near you.

Features & Benefits of the K&N 81-1012 Inline Fuel/Oil Filter

• Designed for racing applications
• Can be used in fuel or oiling system
• Works with high octane race gas and methanol
• Improves fuel delivery
• Prevents premature wear to fuel pump, fuel injectors / carburetor jets
• Reusable 74 micron stainless steel filter element
• Anodized billet aluminum housing
• Viton seals

K&N 81-1012 Inline Fuel/Oil Filter Protects:

• Fuel Pump
• Fuel Injectors
• Carburetor Jets

K&N 57-1120 FIPK Performance Air Intake System heat shield and filters

If you want a sturdy, fun-ready UTV, then the 2008-2013 Polaris Ranger RZR 800 is tough to beat. It's got comfortable seating for 3, a rugged tilt bed that can handle 1,000 lbs of gear, and it can tow up to a 2,000 lb trailer. And when the going gets tough, the locking center differential and 50-hp 760cc twin motor can get you up, over and through just about anything. But if you want a bit more giddy-up from your little workhorse, then a K&N 57-1120 FIPK Performance Air Intake can help.

K&N 57-1120 FIPK Performance Intake System installed on Polaris 760cc engine

Horsepower and torque are created by burning a combination of fuel and air inside the cylinders. When you open up the restrictive factory intake system, the engine is able to inhale more air and burn the fuel more completely. This results in more horsepower and torque being created from roughly the same amount of fuel. The K&N 57-1120 Air Intake System is engineered to increase the performance of a Polaris 800 by reducing airflow restrictions and funneling a higher volume of clean air directly into the throttle body.

K&N 57-1120 FIPK Performance Intake System

To straighten out the airflow path, the K&N 57-Series FIPK Performance Air Intake System ditches the curved factory intake tube, for a shortened, wider diameter intake tube, made from durable High Density Polyethylene (HDPE). This smooth bore K&N intake tube virtually eliminates airflow turbulence, and channels air directly into the throttle body. The system is fed by a high-flow conical K&N performance air filter, that's wrapped in a black DryCharger filter wrap, to help repel the water and dirt that can get kicked up out on the trail. The filter is protected by a rugged aluminum heat shield that mounts in place of the factory airbox. A second, smaller K&N air filter is mounted on back of the heat shield, to filter the air through the crank case ventilation hose.

We installed the K&N 57-1120 Performance Air Intake System on a 2008 Polaris RZR 800 EFI, and the dyno tests revealed an estimated horsepower increase of 3.40 horsepower and 2.56 additional ft-lb of torque. The throttle response was also much quicker, which significantly improved drivability. But your individual results may vary, based on the mileage, modifications, and condition of your specific Ranger RZR 800.

Another benefit of the K&N 57-1120 Air Intake system is the reusable air filters. Lots of dirt and dust gets slung around when you're driving off-road, and that can clog up a stock air filter very quickly. A K&N performance air filter on the other hand, uses a special oil-treated cotton gauze material, that can trap more dirt, while allowing higher volume of air to flow through it. So when you're done covering your UTV in mud and dirt, you can restore performance and keep the engine protected by simply popping off the K&N filter, cleaning it, then treating it with the K&N filter oil. Plus, this entire 50-state legal K&N intake system is backed by the K&N 10-Year/Million Mile Limited Warranty.

And remember to check out all of the other K&N ATV performance parts by using the Search by Vehicle Tool.

Features & Benefits of the K&N 57-1120 FIPK Performance Air Intake System

• Guaranteed to increase horsepower & torque
• Sharpens throttle response
• Free-flowing air intake tube improves airflow
• Durable construction for reliability in harsh conditions
• Comes with a reusable lifetime air filter
• Kit includes water resistant DryCharger air filter wrap
• Aluminum heat shield protects filter from damage and engine heat
• Replaces entire factory air intake system
• 50-State Legal
• Covered by K&N Million Mile Limited Warranty

K&N Applications for 57-1120 Performance Intake Kit

2013 POLARIS RANGER RZR S 800 EPS LE 760
2013 POLARIS RANGER RZR 800 S LE 760
2013 POLARIS RANGER RZR 800 S 760
2013 POLARIS RANGER RZR 800 LE 760
2013 POLARIS RANGER RZR 800 EPS LE 760
2013 POLARIS RANGER RZR 800 760
2012 POLARIS RANGER RZR S MILITARY 760
2012 POLARIS RANGER RZR S 800 EPS LE 760
2012 POLARIS RANGER RZR 800 S LE 760
2012 POLARIS RANGER RZR 800 S 760
2012 POLARIS RANGER RZR 800 LE 760
2012 POLARIS RANGER RZR 800 760
2011 POLARIS RANGER RZR S 760
2011 POLARIS RANGER RZR 800 SW MILITARY 760
2011 POLARIS RANGER RZR 800 760
2011 POLARIS RANGER RZR 4 ROBBY GORDON EDITION 760
2011 POLARIS RANGER RZR 4 800 GORDON EDITION 760
2011 POLARIS RANGER RZR 4 800 EPS ROBBY GORDON EDITION 760
2011 POLARIS RANGER RZR 4 800 760
2010 POLARIS RANGER RZR S 760
2010 POLARIS RANGER RZR 800 760
2010 POLARIS RANGER RZR 4 800 GORDON EDITION 760
2010 POLARIS RANGER RZR 4 800 760
2009 POLARIS RANGER RZR S 760
2009 POLARIS RANGER RZR 800 760
2008 POLARIS RANGER RZR 800 760

You can view all the air intakes that K&N makes for the Polaris Ranger RZR 800 at the Air Intake Systems for the Polaris Ranger RZR 800 page and all the air filters that K&N makes for the Polaris Ranger RZR 800 at the Air Filters for the Polaris Ranger RZR 800 page. You can view all the K&N performance products for any vehicle by using the Search by Vehicle tool and you can find a local K&N retailer by plugging your location into the K&N Dealer Search as well.

K&N VF3001 Cabin Air Filter fits the 2000-2005 Buick LeSabre, 2006-2011 Buick Lucerne, 2000-2005 Cadillac DeVille, 2006-2011 Cadillac DTS, 2000-2005 Pontiac Bonneville & 2000-2003 Oldsmobile Aurora

Breathe easy in your Buick LeSabre/Lucerne, Cadillac DeVille/DTS, Pontiac Bonneville & Oldsmobile Aurora, with a K&N VF3001 Cabin Air Filter

Just like your house, many modern luxury cars have a filtered HVAC system. You wouldn't want to inhale pollen, dust, dirt, or any other contaminants while you're sitting in your living room. So to control the quality of air that you breathe as you're going down the road, many automakers fit their cars with a special cabin air filter. It's designed to clean dirt and allergens from the air before it comes through the ventilation system. But many people forget to change this cabin air filter, and some people aren't even aware that their car has one. This means that you could be breathing air that's had to pass through layers of accumulated gunk, which can be worse than not having a cabin air filter at all.

Designed specifically to restore the air quality in full size GM sedans (2000-2005 Buick LeSabre, 2006-2011 Buick Lucerne, 2000-2005 Cadillac DeVille, 2006-2011 Cadillac DTS, 2000-2005 Pontiac Bonneville, and 2000-2003 Oldsmobile Aurora), the K&N VF3001 Cabin Air Filter benefits from many of the innovations found in K&N performance air filters. It uses a special synthetic filter media that has been electrostatically charged to trap and hold dirt, dust, and other airborne contaminants. The treated synthetic fibers can remove even microscopic contaminants, while allowing more air to flow through the cabin air filter. This improves the efficiency of your car's HVAC system, which can reduce engine strain.

K&N Refresher kit for washable cabin air filters cleans and refreshes K&N cabin air filters

Besides helping your air conditioner and engine to operate more efficiently, the K&N VF3001 Cabin Air Filter helps you to breathe better too. The fiber matrix in the synthetic air filter material helps trap the following airborne allergens:

• Dirt
• Dust
• Mold
• Mildew
• Fungus
• Bacteria
• Germs
• Spores
• Pollen

Unlike traditional disposable factory replacement cabin air filters, the synthetic K&N VF3001 Cabin Air Filter can be cleaned and reused. Every 12-months/12,000 miles, simply open the hood to remove it, then clean it with the K&N Cabin Air Filter Refresh Kit. This not only saves you money, but also allows you to quickly freshen the cabin during allergy season as often as you would like. Plus, every K&N Cabin Air Filter is backed by the K&N 10-Year/Million Mile Warranty.

If you'd like to discover other ways that K&N can improve the performance of your Buick LeSabre, Buick Lucerne, Cadillac DeVille, Cadillac DTS, Pontiac Bonneville, or Oldsmobile Aurora, you can use the Search by Vehicle Tool, or find a K&N dealer near you with the K&N Dealer Search.

Features & Benefits of the K&N VF3001 Cabin Air Filter

• Engineered for the Buick LeSabre / Buick Lucerne / Cadillac DeVille / Cadillac DTS / Pontiac Bonneville / Oldsmobile Aurora
• Restores cabin air quality
• Removes significantly more allergens & contaminants than a stock cabin air filter
• Synthetic fibers prevent mold, mildew, fungus, spores, bacteria, germs, pollen and other allergens from cycling back through the cabin
• Improves efficiency of the HVAC system
• Washable K&N cabin air filter can go up to 12-months/12,000 miles before cleaning is required (depending on driving conditions)
• Replaces paper OEM cabin air filter
• Installation takes less than 5 minutes
• Backed by K&N 10-Year/Million Mile Limited Warranty
  

Applications for K&N VF3001 Cabin Air Filter

2011 CADILLAC DTS 4.6L V8
2011 BUICK LUCERNE 4.6L V8
2011 BUICK LUCERNE 3.9L V6
2010 CADILLAC DTS 4.6L V8
2010 BUICK LUCERNE 4.6L V8
2010 BUICK LUCERNE 3.9L V6
2009 CADILLAC DTS 4.6L V8
2009 BUICK LUCERNE 4.6L V8
2009 BUICK LUCERNE 3.9L V6
2008 CADILLAC DTS 4.6L V8
2008 BUICK LUCERNE 4.6L V8
2008 BUICK LUCERNE 3.8L V6
2007 CADILLAC DTS 4.6L V8
2007 BUICK LUCERNE 4.6L V8
2007 BUICK LUCERNE 3.8L V6
2006 CADILLAC DTS 4.6L V8
2006 BUICK LUCERNE 4.6L V8
2006 BUICK LUCERNE 3.8L V6
2005 PONTIAC BONNEVILLE 4.6L V8
2005 PONTIAC BONNEVILLE 3.8L V6
2005 CADILLAC DEVILLE 4.6L V8
2005 BUICK LESABRE 3.8L V6
2004 PONTIAC BONNEVILLE 4.6L V8
2004 PONTIAC BONNEVILLE 3.8L V6
2004 CADILLAC DEVILLE 4.6L V8
2004 BUICK LESABRE 3.8L V6
2003 PONTIAC BONNEVILLE 3.8L V6
2003 OLDSMOBILE AURORA 4.0L V8
2003 CADILLAC DEVILLE 4.6L V8
2003 BUICK LESABRE 3.8L V6
2002 PONTIAC BONNEVILLE 3.8L V6
2002 OLDSMOBILE AURORA 4.0L V8
2002 OLDSMOBILE AURORA 3.5L V6
2002 CADILLAC DEVILLE 4.6L V8
2002 BUICK LESABRE 3.8L V6
2001 PONTIAC BONNEVILLE 3.8L V6
2001 OLDSMOBILE AURORA 4.0L V8
2001 OLDSMOBILE AURORA 3.5L V6
2001 CADILLAC DEVILLE 4.6L V8
2001 BUICK LESABRE 3.8L V6
2000 PONTIAC BONNEVILLE 3.8L V6
2000 CADILLAC DEVILLE 4.6L V8
2000 BUICK LESABRE 3.8L V6

K&N Filters used carbon fiber for the 2015-2016 Chevrolet Corvette Z06 6.2L supercharged V8 performance air intake system because an aluminum, or HDPE, intake tube wouldn’t do this car justice

Now in its seventh generation of production, the C7 Chevrolet Corvette, introduced for the 2014 model year, incorporates cutting edge technology such as an all-new 6.2-Liter LT1 V8 engine. Chevrolet boasts 460 horsepower, and a zero to sixty mph time of just 3.8 seconds for the standard C7 Corvette Stingray models. While the 6.2L LT1 engine found in 2014-2016 Chevy Corvette Stingray models is certainly no slouch, Chevrolet took the Corvette to a whole different level of performance with the 2015 Corvette Z06. The 2015-2016 Chevrolet Corvette Z06 is a higher performance version of the Chevrolet Corvette Stingray with a 6.2L supercharged & intercooled LT4 engine. Chevrolet rates the 2015-2016 Corvette Z06 with an astounding 650 HP and 650 lb-ft of torque.

The 2015-2016 Z06 package doesn’t just equip a standard C7 Stingray with a forced induction V8, there are many differences including fenders which are extended by 56 mm front and 80 mm rear

The 2015-2016 Z06 package doesn’t just equip a standard C7 Stingray with a forced induction V8, no, in fact there are many differences including fenders which are extended by 56 mm up front and 80 mm in the rear. Plus the 2015-2016 Corvette Z06 sports extensive use of carbon fiber throughout the Z06 specific body panels, and aerodynamic aids. So when it came time for engineers at K&N Filters to design a performance air intake system for the 2015-2016 Chevrolet Corvette Z06 6.2L supercharged V8, the usual mandrel-bent aluminum, or roto-molded HDPE intake tube just wouldn’t do this car justice.

The K&N performance air intake, number 63-3090, for 2015-2016 Chevrolet Corvette Z06 models takes advantage of the lightweight and stellar looks of a fully carbon fiber air intake tube

That’s why the K&N performance air intake, number 63-3090, for 2015-2016 Chevrolet Corvette Z06 models takes advantage of the lightweight and stellar looks of a fully carbon fiber air intake tube. The 2015-2016 Z06 carbon intake tube even has a provision for the factory mass airflow sensor molded into it. The use of carbon fiber in this K&N air intake system doesn’t end with the tube. The oval-tapered high-flow performance K&N air filter is finished off with a carbon fiber top plate holding the legendary K&N pleated oiled cotton media between the fully carbon fiber air filter base and flange. Durable reinforced rubber hose connects these pieces while special black zinc coated hose clamps keep it all together. A powder coated mild steel application specific air filter heat shield finished with durable edge trim completes the 2015-2016 Chevy Corvette Z06 K&N intake package.

An additional benefit of installing this K&N air intake on a 2015-2016 Corvette Z06 is the amazing growl released by the supercharged LT4 V8 when the accelerator is pushed to the floor

Just like the Corvette Z06 package, this K&N air intake system performs even better than it looks. K&N performs in-house dyno testing to ensure that each K&N air intake system will provide a guaranteed increase in horsepower. K&N installed performance air intake 63-3090 on an otherwise stock 2015 Chevrolet Corvette Z06 supercharged 6.2L V8, and the results were almost mind blowing. The fact that replacing the restrictive factory air intake tract with a K&N air intake made an estimated additional 50.71 horsepower and 62.85 lb-ft of torque on an already incredible car speaks to the 2015-2016 Z06 model’s potential with a few bolt on upgrades. But as the saying goes, a picture is worth a thousand words, so feel free to take a look at the K&N 2015 Chevy Corvette Z06 dyno chart for yourself.

An additional benefit of installing this K&N air intake on a 2015-2016 Corvette Z06 is the amazing growl released by the supercharged LT4 when the accelerator is pushed to the floor. But once at cruising speed the growl is tamed to a purr and shouldn’t detract from the day to day driving experience. Like other K&N air intake systems, the carbon fiber top and bottom filter used in this air intake is washable and reusable with a K&N Recharger air filter service kit. The entire air intake system is backed by a 10-year/million mile limited warranty to give K&N users the confidence to invest in a K&N performance upgrade. Taking that philosophy one step further, K&N will warrant that when used properly, K&N products will not cause engine damage and will not result in a vehicle

K&N 2015-2016 Corvette Z06 intake made an estimated additional 50.71 HP & 62.85 lb-ft of torque

This K&N air intake is designed to easily bolt up to the following Corvette models:

2016 CHEVROLET CORVETTE Z06 6.2L V8 F/I - All
2015 CHEVROLET CORVETTE Z06 6.2L V8 F/I - All

If you don’t drive the latest and greatest Corvette Z06, but still want the performance increase guaranteed with a K&N air intake, K&N offers many more K&N Air Intake Systems for the Chevrolet Corvette. To find performance K&N air intakes, or factory replacement air filters, for other vehicles, use the K&N Search By Vehicle Tool. K&N upgrades are available online or in person through Authorized K&N Dealers which can be located using the K&N Dealer Search.

The K&N VF1002 is combination of an advanced synthetic filter media that is pleated for a large surface area, electrostatically charged and secured in a durable polyurethane frame.

Working the construction site, taking the team to the next away game or towing the trailer on that epic see-the-USA road trip virtually requires a full-size pickup or SUV. Perfect for this type of use are the well-respected truck-based haulers from Nissan: Titan, Armada and QX56.

These trucks do a great job of addressing the high capacity performance demands in this segment of the motoring market. They are all about cargo and interior space with room to carry everything and everyone needed for the job. They share a 317-400 hp, 5.6-liter V8 and can tow more than 8,000 lb. They have interior room for six in the Titan in extended and crew cabs, and up to eight in the Armada and Q56 with three-row seating.

With people in the cab for hours on end, they need to breathe good, clean air, and the A/C and heater need to have unobstructed output. The Titan, Armada and Q56 also share a piece of vital equipment: the cabin air filter.

A deceptively small system with a big job, there are two filters behind the glove compartment of all three vehicles. With the amount of work they do, keeping up on cabin filter maintenance should be done regularly, just like replacing windshield wipers and topping up the transmission fluid.

The chore is simple to do with minimal tools and better yet, there is a sustainable replacement part available that provides superior air cleaning performance - the K&N VF1002 washable cabin air filter.

The K&N Washable Cabin Air Filter is the first of its kind designed to replace your vehicle's stock cabin air filter with a washable and reusable version that cleans and freshens incoming air. Watch the K&N Washable Cabin Air Filters Overview video for more information on how cabin air filters work.

A deceptively small system with a big job, there are two filters behind the glove compartment of the Titan, Armada and Q56.

Using a combination of an advanced synthetic filter media that is pleated for a large surface area and secured in a durable polyurethane frame, K&N cabin air filters grab and help remove dust, dirt, mold, mildew, fungus, allergens, bacteria and other debris. The VF1002 is intended to be refreshed every 12,000 to 15,000 miles, depending on driving conditions using the K&N Refresher™ cleaning kit.

Starting with the pump spray cleaner, loosen dirt and road grime from your K&N cabin air filter then rinse in clear running water. Next, allow them to air dry for approximately 30 minutes. Finish by spraying with K&N cabin air filter Refresher to restore the electrostatic properties of the filter and help it carry on trapping contaminants. This long-lasting formula helps eliminate the source of most odors and it is made from safe, biodegradable ingredients.

Your supersize hauler will probably be with you for a while, and so will the need for effective cabin air filtration. Thankfully, K&N replacement cabin air filters come with a 10-Year/Million Mile Limited Warranty to ensure miles of clean air on your journeys.

K&N cabin air filters can be efficiently laundered using the K&N Refresher™ spray kit, starting with the cleaner, following with rinsing and drying, then finishing with the refresher to restore the electrostatic charge.

The following part numbers can be replaced with the K&N VF1002:
Champ Labs. CAF1804C
Champ Labs. CAF1804P
Fram CF10388
Infiniti 272987S600
Infiniti 27298ZR00A
Infiniti 999M1VP005
Micro-Guard 3058
Nissan 272987S600
Nissan 27298ZR00A
Nissan 999M1VP005
WIX 24854

The following vehicles can use the K&N VF1002 replacement cabin air filter:
2015 NISSAN TITAN 5.6L V8 F/I - All
2015 NISSAN ARMADA 5.6L V8 F/I - All
2014 NISSAN TITAN 5.6L V8 F/I - All
2014 NISSAN ARMADA 5.6L V8 F/I - All
2013 NISSAN TITAN 5.6L V8 F/I - All
2013 NISSAN ARMADA 5.6L V8 F/I - All
2012 NISSAN TITAN 5.6L V8 F/I - All
2012 NISSAN ARMADA 5.6L V8 F/I - All
2011 NISSAN TITAN 5.6L V8 F/I - All
2011 NISSAN ARMADA 5.6L V8 F/I - All
2010 NISSAN TITAN 5.6L V8 F/I - All
2010 NISSAN ARMADA 5.6L V8 F/I - All
2010 INFINITI QX56 5.6L V8 F/I - All
2009 NISSAN TITAN 5.6L V8 F/I - All
2009 NISSAN ARMADA 5.6L V8 F/I - All
2009 INFINITI QX56 5.6L V8 F/I - All
2008 NISSAN TITAN 5.6L V8 F/I - All
2008 NISSAN ARMADA 5.6L V8 F/I - All
2008 INFINITI QX56 5.6L V8 F/I - All
2007 NISSAN TITAN 5.6L V8 F/I - All
2007 NISSAN ARMADA 5.6L V8 F/I - All
2007 INFINITI QX56 5.6L V8 F/I - All
2006 NISSAN TITAN 5.6L V8 F/I - All
2006 NISSAN ARMADA 5.6L V8 F/I - All
2006 INFINITI QX56 5.6L V8 F/I - All
2005 NISSAN TITAN 5.6L V8 F/I - All
2005 NISSAN ARMADA 5.6L V8 F/I - All
2005 INFINITI QX56 5.6L V8 F/I - All
2004 NISSAN TITAN 5.6L V8 F/I - All
2004 NISSAN PATHFINDER ARMADA 5.6L V8 F/I - All
2004 NISSAN PATHFINDER 5.6L V8 F/I - All
2004 INFINITI QX56 5.6L V8 F/I - All

Use the K&N application search, to confirm the correct cabin air filter for your vehicle, then visit the online K&N dealer search to make your purchase at the K&N dealer closest to you.