Dernières Nouvelles

K&N Performance Air Intake System 77-3085KP for 2014-2016 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6

These days a full-size pickup truck is expected to do more than just carry a fully loaded bed, or tow a trailer. A modern full-size pickup truck is expected to also incorporate a refined interior with modern-day technology, a comfortable platform that is quiet on-road, rugged off-road, and of course, it must have style. Not only that, but EPA requirements and consumer expectations have forced full-size truck manufacturers to squeeze more power and better fuel economy out of their engines.

General Motors (GM) used the 4.3L 4300 Vortec V6 as its base engine for the full-size Chevrolet Silverado 1500 and GMC Sierra 1500 for years. In 2013 this engine was rated at 195 horsepower and 260 lb-ft of torque. However, for 2014 the same size 4.3L EcoTec3 V6 engine with new technologies such as direct injection, variable valve timing, and even active fuel management, allows the standard V6 to produce 285 horsepower and 305 lb-ft of torque. This puts the standard 2014 Silverado / Sierra EcoTec3 V6’s performance on par with the 4.8L Vortec V8 engine of the 2013 Silverado and Sierra.

This of course doesn’t mean that 2014 Chevy Silverado 1500 and GMC Sierra 1500 owners won’t benefit from a little more horsepower and torque. In fact, by simply installing K&N performance air intake 77-3085KP 2014 Silverado and Sierra V6 owners can increase acceleration and add more power for hauling or towing.

This 2014 Chevy Silverado 1500 features a 4.3L EcoTec3 V6 engine as its standard power plant and boast best in class standard V6 torque

The 77-3085KP intake system’s bright intake tube looks good under the hood of this 2014 Chevrolet Silverado 4.3L EcoTec3 V6

The K&N 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, mandrel-bent aluminum air intake tube to help minimize restriction, straighten, and increase airflow to the engine. The intake tube is then finished with a bright, chrome-like, finish for good looks and durability.

A K&N high-flow chrome top conical air filter RF-1041 is fitted to the inlet of the intake system to provide superior airflow and superior performance without sacrificing filtration efficiency. The filter is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions.

When it does come time to service the K&N air filter, cleaning can be easily completed using one of K&N’s readily available Recharger air filter service kits. The 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system also incorporates an air filter heat shield which helps to guard cooler air entering the engine from ambient heat.

Because the 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system is designed to decrease restriction, and increase airflow, it is able to make impressive performance gains in horsepower and torque throughout the entire RPM range of the already powerful standard V6 engine.

On the dyno, when installed on a 2014 Chevrolet Silverado 4.3 liter EcoTec3 V6, the 77-3085KP performance air intake system produced an estimated additional 10 horsepower at 5285 RPM and 13.54 pound-feet of torque at just 3,548 RPM. Increased power will require the engine to expend less energy to cruise down the highway with active fuel management in place, or help during full throttle acceleration situations.

2014 Chevrolet Silverado 4.3 liter EcoTec3 V6 gains an estimated 10 more horsepower and 13.54 lb-ft of torque

The 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 air intake system is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions.

The cold air intake maintains all necessary factory connections and does not require any additional modifications be made to the vehicle. K&N backs its air filters and air intake systems with a 10-year, Million Mile Limited Warranty^® so that owners can rest assured that their intake system can stand up to tough conditions.

Whether the 2014 Chevrolet Silverado 1500 4.3L and GMC Sierra 1500 4.3L EcoTec3 V6 is used as a reliable daily driver, dedicated workhorse, or something in between, the K&N 77-3085KP Performance Air Intake system will provide increased performance with better engine sound for years to come.

The 77-3085KP performance air intake system is guaranteed to increase horsepower and torque on the following Chevrolet and GMC models:

2016 GMC SIERRA 1500 4.3L V6
2016 CHEVROLET SILVERADO 1500 4.3L V6
2015 GMC SIERRA 1500 4.3L V6
2015 CHEVROLET SILVERADO 1500 4.3L V6
2014 GMC SIERRA 1500 4.3L V6
2014 CHEVROLET SILVERADO 1500 4.3L V6

Find additional air intakes for your Chevrolet Silverado / GMC Sierra, or another vehicle, using the search by vehicle tool on KNFilters.com or view the GMC Sierra 1500 Air Intakes or Chevy Silverado 1500 Air Intakes pages. To find a dealer near you, please use the K&N Dealer Search function.

It will be a minimum of 10 years before he’ll be licensed by the California Department of Motor Vehicles, however, 6-year-old Jacob Hodges has earned his Jr. Drag Racing license

Jacob Hodges was initiated into the world of drag racing at the recent SCEDA event at Auto Club Dragway in Fontana, California

It will be a minimum of 10 years before he’ll be licensed by the California Department of Motor Vehicles, however, 6-year-old Jacob Hodges has earned his Jr. Drag Racing license. During the recent Southern California Drag Racing Association (SCEDA) race weekend at Auto Club Dragway in Fontana, California Jacob was initiated into the heart pounding world of drag racing. Jacob spent two days on the track running through the paces and earning his stripes. He was taught the rules and basics of drag racing before being towed down the track to practice steering and braking in a moving car.

The next morning Jacob was ready to get live seat time with the engine running in his 2006 Hansen built Jr. Dragster. The drills consisted of practicing staging, accelerating to the 60 foot mark and stopping, followed by a longer 330’ run down the track. After a break Jacob was ready to get back in the car and make his first attempt at a full 1/8 mile run. According to Jacob’s father Travis Hodges, who is K&N’s Race Team Manager, “He did perfect, staged good and ran down the track in 20.36 seconds at 25 mph.” Jacob had two more runs down the 1/8 mile drag strip clocking an elapsed time (E.T.) of 17.40 seconds at 32 mph for his final license earning pass.

Jacob’s dad, Travis, has equipped the Jr. Dragster with K&N clamp-on universal air filter R-1100 to keep the Briggs & Stratton 5 HP “lawnmower” engine running at its peak

Come Sunday Jacob was ready for some real racing. He took two practice runs in the morning with his first round race scheduled for early in the afternoon. Jacob was pitted against Carlie Ball in the Lil DudeT 7927 Jr. Dragster. Jacob had the better reaction time behind the wheel of the 7290 K&N Motorsports Jr. Dragster at just .041 seconds versus Carlie’s .185. However, at the stripe Jacob ran slower than his dial-in time handing the first round win over to Carlie.

Jacob was pitted against Carlie Ball in the Lil DudeT 7927 Jr. Dragster and Jacob had the better reaction time off the line

In the end Travis Hodges said “It was a great weekend getting 6 full runs, his license and seat time. Jacob got a lot of compliments on his ability to listen well, stage the car like a pro, and drive the car down the track straight, especially for a 6-year-old.” Jacob’s 2006 Hansen built Jr. Dragster is powered by a 5 horsepower Briggs & Stratton spec engine. The car’s frame has been powder coated tangerine orange and wrapped in K&N graphics. This car wouldn’t be complete without the superior airflow and superior performance of a K&N high-flow air filter. Jacob’s dad, Travis, has equipped the Jr. Dragster with K&N clamp-on universal air filter R-1100 to keep the “lawnmower” engine running at its peak.

Jacob’s next race will be on March 21 and 22 at the NHRA Division 7 drag races at Irwindale Raceway. Jacob and his dad plan to enter 5 to 9 different races and it will be exciting to watch this young driver progress. Travis Hodges said “Thanks to K&N, Raven & Hawk LLC, and Doug Whitten, if it wasn’t for them none of this would be possible.”

K&N performance replacement air filter, number SU-1506, is specifically designed to fit 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Suzuki FU150 Raider models

Underbone motorcycles are especially popular in South Asian and South East Asian countries. Although the appearance is similar to a scooter, the wheels, engine position, and transmission are based on the design of conventional motorcycles. The 2004-2010 Suzuki FU150 Raider is classified as an underbone motorcycle and with an engine borrowed from the Suzuki FXR150 sport bike, the Raider is capable of a top speed of around 135 kilometers an hour.

The Suzuki FU150 Raider underbone motorcycle has a performance oriented 150cc DOHC four-stroke engine coupled to a close-ratio 6-speed transmission. 2004-2010 Suzuki FU150 Raider owners looking for a performance upgrade can count on K&N for superior airflow and superior performance. A K&N washable/reusable air filter is built with K&N’s famous high-flow cotton air filter media to provide increased airflow over the stock air filter and meet the performance demands of Suzuki FU150 Raider owners.

The K&N performance replacement air filter SU-1506 is specifically designed to fit into the stock air filter box of 2004, 2005, 2006, 2007, 2008, 2009, and 2010 Suzuki FU150 Raider models with a 150cc engine. K&N high-flow replacement air filters are performance designed to provide increased airflow without sacrificing filtration efficiency and engine protection. K&N performs air filtration efficiency testing according to the internationally recognized ISO 5011 protocol and makes those test results available for viewing.

Additional modifications, such as fuel management modifications, are not necessary to obtain increased performance with K&N replacement air filter SU-1506. K&N oiled cotton gauze air filters can be easily cleaned using one of K&N’s Recharger air filter service kits. Covered by a 10-year/million mile limited warranty, and made in the USA, K&N’s SU-1506 replacement air filter is designed to outlast your Suzuki FU150 Raider underbone motorcycle.

K&N replacement air filter SU-1506 will provide superior airflow and superior performance for the following Suzuki Raider models:

2010 Suzuki FU150 Raider R 147
2009 Suzuki FU150 Raider R 147
2008 Suzuki FU150 Raider R 147
2007 Suzuki FU150 Raider R 147
2006 Suzuki FU150 Raider R 147
2005 Suzuki FU150 Raider 147
2004 Suzuki FU150 Raider 147

K&N air filter SU-1506 is designed as a direct air filter cross reference for Suzuki filter number 1378025G00.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

Students of Ice Action & Training learn performance driving techniques for ice and snow surfaces including sliding, circular paths, load change and try those skills in a Rally stage race

Winters in the north of Finland last around 200 days with permanent snow cover from about mid-October to early May making this an ideal location for the Ice Action & Training school

In the far northern region of Finland three champion Rally racers have combined their 30+ years of competitive driving experience to form a unique driving school named Ice Action & Training. Over the course of 3 to 4 days, students will get behind the wheel of specially equipped Subaru WRX STi as well as Subaru BRZ cars and take them to the limits. The Ice Action & Training school is set on 450 hectares (just under 2 square miles) in the far northern region of Finland near Ivalo, Invari. Winters in the north of Finland last around 200 days with permanent snow cover from about mid-October to early May making this an ideal location for the Ice Action & Training school. Students of the school will learn performance driving techniques for ice and snow surfaces, sliding surfaces, circular paths, and several load change sections. Additionally the school incorporates a rally handling track with high snow banks where it holds a special rally stage race up to 6 km long.

Ice Action & Training employs three driving instructors, Sandro Wall Wine, Armin Black, and Mark Wall Wine, who have over three decades of combined Rally World Cup experience. Between the three instructors there is almost no driving situation which they have not encountered and they impart this experience gained behind the wheel of Rally cars upon the students of Ice Action & Training. The driving school relies upon the Rally proven all-wheel-drive performance of its fleet of eight Subaru WRX STi models. Five Subaru BRZ models are included in the school’s fleet to help teach controlled drifting techniques with a rear-wheel-drive car. Ice Action & Training is supported by K&N air filters and each of the production fleet vehicles are equipped with a K&N performance air intake system. K&N air intake systems offer the superior airflow and superior performance needed to turn the spiked Michelin ice tires.

K&N air intake systems offer the superior airflow and superior performance needed to turn the Subaru WRX STi car’s spiked Michelin ice tires

K&N high-flow air filters and performance air intake systems provide the Ice Action & Training school with the performance and protection needed for aggressive driving in tough conditions

Ice Action & Training’s Subaru WRX STi fleet is equipped with the K&N Typhoon short ram intake 69-8005TWR. A K&N high-flow air filter, mandrel-bent aluminum air intake tube, and an application specific air filter heat shield combine to add an estimated 17.49 more horsepower and 17.52 lb-ft of additional torque to this already fast car. The Subaru BRZ models used by Ice Action & Training for rear-wheel-drive exercises are also equipped with K&N performance air intake systems. Each Subaru BRZ, which shares its platform with the Scion FR-S, is fitted with K&N Typhoon short ram intake system 69-8619TS. K&N high-flow air filters and performance air intake systems provide the Ice Action & Training school with the performance and protection needed for aggressive driving in tough conditions.

More horsepower isn’t just for race cars; it’s for your car. Use the K&N Search By Vehicle Tool to find products for your Subaru or other vehicle. Use the K&N dealer search to find an authorized K&N dealer in your part of the world.

2010 Ford Mustang 4.0L V6 air intake includes an oversized K&N high-flow air filter fitted to the end of a custom engineered rotationally molded HDPE air intake tube

The fifth-generation Ford Mustang received a makeover for the 2010 model year. Although the 4.0L Cologne V6 and 4.6L modular V8 were carried over from the 2005-2009 Ford Mustang, changes to the exterior and interior meant K&N needed to design new air intake systems for 2010 Ford Mustang models. However, Ford introduced a new 3.7L Duratec V6 and the 5.0L V8 Coyote Motor for the 2011 Ford Mustang. This makes the 2010 Ford Mustang an oddball in Mustang history and perhaps one day it might even be a rare collectable.

The 2010 Ford Mustang an oddball in Mustang history and perhaps one day it might even be a rare collectable

What many owners of 2010 Ford Mustang models are probably upset with is the huge increase in horsepower the Mustang received in 2011. 2010 Ford Mustang 4.0L V6 owners seeking a street legal boost in horsepower should look to K&N air intake 57-2577. For 2010 Ford Mustang 4.0L V6 models, an oversized K&N high-flow air filter RC-4381 is clamped to the end of a custom engineered rotationally molded HDPE air intake tube. An application specific air filter heat shield is included with the 2010 Ford Mustang 4.0L V6 air intake to help deflect engine heat away from the air filter. All of the design features of a K&N performance air intake system work together to deliver increased performance by increasing the amount of airflow available to the engine, reducing air intake tract restriction and straightening the airflow for less turbulence.

An application specific air filter heat shield is included with the K&N 2010 Ford Mustang 4.0L V6 air intake

On the dyno, K&N 2010 Ford Mustang 4.0L air intake 57-2577 produced an estimated additional 7.4 horsepower at 7700 rpm and an equally beneficial 8.27 pound-feet of torque over the factory air intake ducting and air filter box of an otherwise stock 2010 Ford Mustang 4.0L V6. Increased horsepower and torque will increase acceleration and the elimination of the stock air intake baffling will improve 2010 Ford Mustang 4.0L V6 engine sound. More horsepower will improve the overall driving experience especially when accelerating onto a highway, passing a big rig, or going uphill.

More horsepower will improve the overall 2010 Ford Mustang 4.0L driving experience, especially when accelerating onto a highway, passing a big rig, or going uphill

K&N performance air intake systems include a world famous K&N washable and reusable high-flow air filter. The oversized and pleated design of a K&N air filter, such as RC-4381, is designed to provide a large surface area. As a result a K&N air intake system’s K&N air filter can go up to 100,000 miles between cleanings, depending on driving conditions. When it does come time to service the K&N air filter, a readily available K&N Recharger air filter service kit will restore the filter to like-new performance.

With simple to follow instructions and no need to make any other modifications to your 2010 Ford Mustang 4.0L V6, you’ll be on the road in approximately 90 minutes with more street legal horsepower under your right foot. If all that weren’t enough, K&N backs the 57-2577 2010 Ford Mustang 4.0L V6 air intake system with a 10-year/million mile limited warranty. K&N air intake system 57-2577 is engineered to provide a guaranteed increase in horsepower for the following Ford Mustang models:

2010 Ford Mustang 4.0L V6

To find additional K&N Ford Mustang performance parts, please visit the Ford Mustang air filters and Ford Mustang air intakes pages. To find K&N performance upgrades for other vehicles, use the Search by Vehicle tool. To find an authorized K&N dealer nearby, use the K&N Dealer Search function.